For some time now I have been in great need of small and cheap AIS receivers that could be used for guiding various tracking equipment during Copenhagen Suborbitals missions. AIS stands for Automatic Identification System and is used by maritime vessels for reporting various status, including position, heading and speed.
Continue reading “A 2-channel AIS receiver using rtl-sdr and gnuais”
I was testing the Gqrx FM stereo code by Alex Grinkov using an RTL-SDR dongle when I noticed that the recently added auto-gain in the driver can be quite useful.
Continue reading “Hardware AGC in RTL-SDR devices”
Support for RTL2832U-based DVB-T dongles and USRP devices from Ettus Research is now available in the Gqrx source code repository.
Support for RTL2832U-based DVB-T devices is available via the rtl-sdr and gr-osmosdr libraries. This also provides support for Ettus Research USRP’s if the gr-uhd package has been installed prior to compiling gr-osmosdr. A complete build from scratch that would support all hardware devices would thus include the following steps:
Continue reading “Gqrx with RTL-SDR and UHD support”
I have previously written about interference from FM stations on the HO-68 linear transponder. Now it appears the other satellites with linear transponders also suffer from local FM traffic by people who haven’t got a clue that they are transmitting in the satellite uplink segment of the 2 meter band.
Continue reading “FM transmissions over FO-29 linear transponder”
Here is a new recording showing an updated Gqrx receiving the FO-29 amateur radio satellite using the Funcube Dongle. Previous recordings used an early version of Gqrx. It was a very quiet pass, most notable thing was probably the Russian and Spanish hams using FM. They probably don’t have a clue that their signal comes over a satellite transponder. Another video recording focusing on the FM transmissions during this FO-29 pass is available here.
Continue reading “FO-29 reception with Gqrx and Funcube Dongle (new recording)”
I don’t think I ever posted a video showing the built-in AFSK1200 demodulator and decoder in Gqrx, so here it is. The video show local APRS traffic in Copenhagen on a Sunday afternoon. I also tried to receive from the ISS but nothing heard this time.
Continue reading “APRS reception with Gqrx and Funcube Dongle”
Here is a short demo showing how to receive broadcast FM with Gqrx. This demo uses the Funcube Dongle, which is really not suited for broadcast FM reception. Gqrx does not employ any tricks to make it sound like it works properly – it just does straightforward FM demodulation with wide FM parameters and you will hear the lack of sufficient bandwidth as distortion on some stations (not all though).
Continue reading “Broadcast FM reception with Gqrx and Funcube Dongle”
I was playing with my Funcube Dongle last Saturday testing Gqrx for the long awaited 2.0 release. I was using the Funcube Dongle together with the shortwave converter I got some time ago and a 5 meter long wire attached via an antenna tuner. Amongst all the traffic there is on shortwaves I recorded these two transmissions: UVB-76 aka. The Buzzer, and whistle like signal believed to be a radar in Israel.
Continue reading “Fun with the Funcube Dongle”
Last week I have tested the RTL2832U-based ezcap EzTV666 DVB-T dongle on the air using various VHF signal.
Continue reading “EzTV666 DVB-T dongle on the air”